Alaris® PCA module
Topic 2: Preparing an Infusion

Resources

Selecting the Syringe Type and Size

After the syringe has been loaded, it is very important to select and validate the correct syringe type and size, because mismatches can result in over or under infusion.

1. Ensure that the security lock is in the PROGRAM position.
2. Press the Channel Select key and the system will prompt you to select and confirm the syringe type and size. To do this:
   • Press the soft key next to the installed syringe type and size.
   • If the installed syringe is not listed, press the ALL SYRINGES soft key and select the correct syringe from the list.
   • Press the Confirm soft key to accept your selection.

Note: Whenever the syringe controls are released to change or reload a syringe, reselection and confirmation of syringe type and size is required.